Water Services Tools & Machines
Feed Tap™ Drilling Machine
Feed Tap™ Drilling Machine is a great waterworks tool that drills through pipe wall while under pressure using a corporation stop inserted into a service saddle.
Direct Tapping Machine
Reed's Direct Tapping Machine is used to drill and tap water mains while under pressure, then to install 3/4'' or 1'' corporation stops in a 2-step operation.
Drilling Machines cut or drill through the pipe wall of cast iron, ductile iron, C900 PVC and PE water mains via the corporation stop inserted into the service saddle while under pressure.
Combination Drilling / Tapping Machines
Reed’s combination drilling and tapping machines are easier to use, save operating time, and are a better value than any other machine.
PVC/PE Drilling Machines
The PVC drilling machine is used to cut through the PVC pipe wall via the corporation stop inserted into the service saddle while under pressure.
PVC/PE Shell Cutters
PVC/PE Shell Cutters cut through service saddles on PVC and PE.
Award-winning DT75 and DT100 drill taps perform fast with six cutting edges for clean threads and fewer leaks.
This cutting lubricant extends the life of drill taps and cutters.
Power Units for Tapping/Drilling
Add power to your drilling and tapping, and save hours of hand-cranking.
PE Water Service Shut-off Tool
Designed for emergency shut-off of PE water services.
Standing Shut-Off Tool
Reed's Standing Shutoff Tool compresses 3/4" to 1" PE plastic tubes to stop the flow of water.
Copper Shut-Off Tools
Designed to shut-off the flow and also to reform Type K copper tubing. One-piece construction with no accessories needed; eliminates lost feed screw wrench.
High-quality, hardened steel flare tools make 45° flares on Type K soft copper water service tubing.
Pressure Relieving Hammer Flares
With precision channels drilled from the tool’s end to its side, they allow flaring even when water is in the service line.
Tools easily and quickly re-round Type K copper tubing for better seal when compression fittings are used.
Soft-faced brass hammer for use with flare tools.
Round It® Straightener/Rerounder
Save time and materials by using Round It® Straightener/Rerounders on copper tubing.
Fiberglass Probe Rod
Fiberglass Probe Rods provide a safe way to locate pipe and utility lines.
Meter Pit Pump
Reed offers solutions for those encountering flooded meter pits. Reed’s heavy-duty Meter Pit Pumps pull water out of pits making them more visible, convenient, and safe.
Remove manhole covers with ease using Reed Manhole Hooks.
Drill-Powered Hydrostatic Test Pump
Lightweight, portable test pump powered by a cordless or electric drill.
Electric Hydrostatic Test Pumps
For pressure testing water systems in both residential and commercial buildings.
Hydrostatic Test Pump
Hydrostatic Test Pumps are designed to test water meters, plumbing lines, pressure vessels, solar systems and sprinkler systems, in both residential and commercial buildings.
Valve & Curb Keys
Reed’s selection of Valve Keys is the most complete and most compact available to turn gate valves in the street and curb stop valves to individual buildings.
Ratcheting Valve Keys
Ratcheting Valve Keys are a great backsaver for twists and turns on valves.
Corporation Stop Key Sockets
A helpful way to open/close the corp stop key.
The Valve Operator brings power to valve operation. It is compact, easily transported, and includes a power drive, clutch drophead, valve key and extension.
Meter Box & Curb Box Lid Keys
Reed Meter Keys open many styles of meter pit lids and curb box lids. Reed has the widest choice of pentagon keys and “skeleton” keys available, ending lengthy searches for the right key.