Clean Ream Extreme® Plastic Pipe Fitting Reamers
- Clean leftover pipe and solvent cement residue from PVC, CPVC or ABS fittings.
- Reduce labor time and materials costs by reusing the fittings.
- Available in 7 sizes and fit into standard ½” drills.
- Clean edge of PPR with solvent to remove the thin film left by solvent cement.
- Use high torque, low RPM drill setting to reduce heat caused by friction and to provide the cleanest ream.
|Catalog No.||Item Code||Description||Shaft Size||Weight|
|PPR75||04521||Reams 3/4" Sch. 40 PVC, CPVC & ABS Fittings||1/4" hex||.12||.05|
|PPR100||04522||Reams 1" Sch. 40 PVC, CPVC & ABS Fittings||1/4" hex||.14||.06|
|PPR125||04523||Reams 1 1/4" Sch. 40 PVC, CPVC & ABS Fittings||3/8" hex||.30||.13|
|PPR150||04524||Reams 1 1/2" Sch. 40 PVC, CPVC & ABS Fittings||3/8" hex||.40||.18|
|PPR200||04525||Reams 2" Sch. 40 PVC, CPVC & ABS Fittings||3/8" hex||.60||.27|
|PPR300||04526||Reams 3" Sch. 40 PVC, CPVC & ABS Fittings||3/8" hex||1.2||.52|
|PPR400||04527||Reams 4" Sch. 40 PVC, CPVC & ABS Fittings||3/8" hex||2.0||.89|
|PPRK4||04528||Kit with PPR150, PPR200, PPR300, PPR400 in a hard plastic case||See Chart||7.6||3.5|
|PPRK5||04520||Kit with PPR125, PPR150, PPR200, PPR300, PPR400 in a hard plastic case||See Chart||7.8||3.5|
|PPRK6||04529||Kit with PPR75, PPR100, PPR150, PPR200, PPR300, PPR400 in a hard plastic case||See Chart||7.9||3.6|
|PPRLS11||94528||11.5” Extension Shaft||3/8” hex||.38||.17|
NOTE: REED plastic pipe reamers (Clean Ream Extreme® and Clean Ream Plus®) work with North America pipe diameters as they fit specific ID/OD for reaming work.
Money-saving plastic pipe reamers (also know as socket savers and/or hub savers) are designed to clean out the old or broken pipe and leftover solvent cement from a fitting so the fitting can be reused. In this era of green living and recycling, try these reamers on PVC, CPVC or ABS to save time and material costs. Plastic Pipe Fitting Reamers fit into standard ½” drills. PPR socket savers work great for vent lines, drain lines, and water lines. Carbide cutting insert on socket saver provides a cutting edge on each side. Rotate the socket saver's cutting insert before replacement and receive three additional cutting edges.
NOTE: Clean Ream Extreme® Plastic Pipe Fitting Reamers are NOT recommended for use on pressurized systems.
Plastic Pipe Fitting Reamers Parts PDF (253 KB)