Saw It® Pneumatic Saw
- Saw It® pneumatic saw is a good choice for cutting plastic and steel pipe and a great cutting tool for hard-to-reach places.
- Immediate shut down when you let go of the throttle.
- Immediate start up when you squeeze the throttle.
- Saw It® Vise and Saw It® Blade Guides should be added for extra stability.
|رمز العنصر||رقم الدليل المصور||الوصف||السعة ||الحد الأقصى للقدرة||استهلاك الهواء||الاستخدام||الوزن|
| SAWITSD2||07620||Saw It® with Safety Deadman Switch||up to 24" max.||up to 610 max.||2.0 HP, 1.5 kW||40 cfm @ 90 psi (18.9 l/s @ 6.2 BAR)||Aluminum, Copper, Plastic, Steel/Stainless Steel Sch. 40, Steel Tubing||21.5||9.8|
تعتمد السعة على تمديدات الشفرة والسلسلة.
This saw is safer and cuts straighter than a gas-powered chop saw. The Saw It® Vise allows the saw to pivot straight into the pipe, giving the operator better control over the cut. Used together, this saw is EASY to handle.
Saw It® pneumatic saw provides power and reciprocating motion to blades. Used with Power Hack Saw Blades (sold separately), this saw cuts plastic, steel, stainless steel, and C900/C905 PVC pipe. SAWITSD2 model improvements include more powerful air motor, up to 20% faster cutting performance and adjustable exhaust flow air direction. Saw It turns and works freely, along with starting easy and running smoothly. As a safety feature, a trigger lock prevents accidental “on” if the trigger is bumped or pressed unintentionally. Saw It® needs 6” clearance beyond the pipe to accommodate blade movement. The Saw It® must have a means to hold it in place and the recommended Saw It® Vise (sold separately) provides stability and safety for the cut. Optional Blade Guides provide directional guidance for the saw. Maximum capacity is blade and blade guide dependent. Saw It cuts up to 24” diameter pipe when used with the Saw It Vise and a 12” chain extension. Saw It cuts up to 20” (500 mm) diameter pipe when used with recommended SAWITBG30 blade guide. Pneumatic saws are less likely to ignite materials than gas-powered saws and even some electrical-powered saws. However, the Saw It is not recommended for gas lines.
Saw It Vise #04600 fits 4” - 12” diameter pipe. When one chain extension, 6” or 12”, is added, the vise capacity increases to 18” or 24” respectively.
NOTE: Always use a Filter-Regulator-Lubricator (FRL) with Reed pneumatic tools like the Saw It®. Reed offers FRL #97591 for user convenience.
14 TPI work on materials at least 1/8” thick. 8 TPI work on materials at least 3/16” thick. Use fewer teeth per inch on softer materials like plastic.