Reed's Direct Tapping Machine is used to drill and tap water mains while under pressure, then to install 3/4'' or 1'' corporation stops in a 2-step operation.

Drilling Machines cut or drill through the pipe wall of cast iron, ductile iron, C900 PVC and PE water mains via the corporation stop inserted into the service saddle while under pressure.

Reed’s combination drilling and tapping machines are easier to use, save operating time, and are a better value than any other machine.

The PVC drilling machine is used to cut through the PVC pipe wall via the corporation stop inserted into the service saddle while under pressure.

PVC/PE Shell Cutters cut through service saddles on PVC and PE.

Award-winning DT75 and DT100 drill taps perform fast with six cutting edges for clean threads and fewer leaks.

Add power to your drilling and tapping, and save hours of hand-cranking.

Feed Tap™ Drilling Machine is a great waterworks tool that drills through pipe wall while under pressure using a corporation stop inserted into a service saddle.

Designed for emergency shut-off of PE water services.

Reed's Standing Shutoff Tool compresses 3/4" to 1" PE plastic tubes to stop the flow of water.

These tools are designed specifically to shut off and reshape 3/4” through 2” Type K copper tubing.

High-quality, hardened steel flare tools make 45° flares on Type K soft copper water service tubing. Brass hammer for safety.

With precision channels drilled from the tool’s end to its side, they allow flaring even when water is in the service line.

Tools easily and quickly re-round Type K copper tubing for better seal when compression fittings are used.

Save time and materials by using Round It® Straightener/Rerounders on copper tubing.

For pressure testing water systems in both residential and commercial buildings.

Hydrostatic Test Pumps are designed to test water meters, plumbing lines, pressure vessels, solar systems and sprinkler systems, in both residential and commercial buildings.

Reed offers solutions for those encountering flooded meter pits. Reed’s heavy-duty Meter Pit Pumps pull water out of pits making them more visible, convenient, and safe.

Reed’s selection of Valve Keys is the most complete and most compact available to turn gate valves in the street and curb stop valves to individual buildings.

Ratcheting Valve Keys are a great backsaver for twists and turns on valves.

The Valve Operator brings power to valve operation. It is compact, easily transported, and includes a power drive, clutch drophead, valve key and extension.

Use Reed's Valve Key Socket Kit to engage a rounded or corroded operating nut on valves in tricky situations.

Reed Meter Keys open many styles of meter pit lids and curb box lids. Reed has the widest choice of pentagon keys and “skeleton” keys available, ending lengthy searches for the right key.

Remove manhole covers with ease using Reed Manhole Hooks.