Reed’s ½ horsepower, electric-motor-driven 5401TMSO Threading Machine centers and chucks pipe and conduit and rotates it while cutting, threading, and reaming operations are performed. Its oil system features a self-priming pump that generously floods the pipe with oil while threading. Convenient open work space features a large, integral oil reservoir and an easy-to-remove, metal chip collection tray. Threading capacity for bolt is ¼” – 2” and for pipe is 1/8” – 2” nominal. There’s plenty of carriage travel (8 1/2") and carriage clearance. Handy three-spoke handwheel with a gear and rack system easily moves the carriage and starts the dies onto the pipe for threading. System includes threading machine, foot pedal, legs, R811 Universal Die Head, 1 gallon of Threadguard Cutting Oil, and two set of High Speed Steel (not alloy!) Universal Dies: ½” – ¾” and 1” – 2” NPT.

Reed’s 5401CRT cart makes transport of the threading machine easy. The heavy-duty cart is fabricated from steel tubing. The cart handles slide in to keep them out of the way when space is an issue. It has an Exclusive Feature caster which is on the same end of the cart as the handles. The caster’s crank handle allows the cart to be moved up and down so that, if desired, the cart can be pushed around instead of lifted and pushed like a wheelbarrow. The cart also features an anti-tip front bar mechanism and a heavy duty steel (not plastic) storage tray. The cart fits the Reed 5401TMSO Threading Machine or Ridgid® 300 Compact, 1224, 1233, 1822, 535, or 535A/585 Manual. ASSEMBLY REQUIRED of cart.