The Hole Master® hole cutting kit provides a means of clamping onto pipe and using a drill and hole saw to cut a hole in the pipe. Hole Master comes with a base, chain and screw for clamping, along with a plate and drill holder for mounting a drill and hole saw to the unit. Use the Hole Master in depressurized piping systems only. The handle and gear provide leverage for cutting holes. Hole Master has a pipe diameter mounting range of 1 1/4” - 10” nom. (42 - 273 mm) and uses hole saws/cutters up through 4 3/4” (120 mm). For convenience, Reed offers options with one cordless DeWalt® or regular Milwaukee® drill and a plastic toolbox. Hole Master requires a hole saw for steel/copper pipe or shell cutter for plastic/ductile iron pipe (sold separately). HCB-200 Hole Master® is a drill guide with 6 bushings to work with 1”, 1 3/16”, 1 1/4”, 1 1/2”, 1 3/4”, and 2” hole saws. Light-weight and easily portable, HCB-200 is strong enough for supporting cuts on carbon steel or stainless steel pipe yet lightweight enough to clamp onto PVC and other plastic pipe. Use the Hole Master on depressurized piping systems only. An electric or cordless standard ½” drill is needed. The versatile HCB-200 accommodates any hole saws that fit the operator’s drill and the chosen bushing. There is a thumb screw on the guide that holds the bushing in place. *HCB-200 shown *Hole Master® 475 series works with either the Milwaukee® 1660-1 and 1660-6 or the Dewalt® DW131 or 18V DC987KA.