Solid Die, Adjustable Guide Threader Sets
- Economical because it’s only necessary to have a die for each pipe size, not a die and a head.
- Guide fingers of the Reed threader sets are adjustable, coated pipe does not need to be peeled back and, by reversing the die, threads can be made within ½ inch of a wall.
|Catalog No.||Item Code||Range Inches||No. Dies Included||Block Size (In.)||Weight|
|SD81-4 ||05105||1/2 - 1||3||2 X 2||6.8||3.1||SD81-3 ||05107||3/8 - 1||4||2 X 2||7.4||3.4||SD81-2 ||05109||1/4 - 1||5||2 X 2||7.9||3.6||SD81-1 ||05111||1/8 - 1||6||2 X 2||8.4||3.8||SD84-7 ||05145||1 1/4 - 2||3||4 X 4||19.8||9.0||SD84-6 ||05147||1 - 2||4||4 X 4||23.2||10.6||SD84-5 ||05149||3/4 - 2||5||4 X 4||26.1||11.9||SD84-4 ||05151||1/2 - 2||6||4 X 4||29.1||13.2|
The Reed adjustable guide system and solid block dies make these the most economical, most convenient, and most versatile threader sets on the market. Because the adjustable guide system adjusts to different sizes of pipe, it is only necessary to have a die for each pipe size, not a die plus a head. Other threader sets which require a die and a head for each size take up considerably more room in the toolbox or truck. Further, with two pawls, handle swing is faster on the adjustable guide threader sets – half that of one pawl competitive sets, and best for close quarter work. Adjustable Guide Threader Sets work well on coated pipe because the diehead can fit over the coating and then be tightened down into place. There is no need to peel back the coating before threading. This speeds up the job and permits maximum retention of the protective coating to extend pipe life. Adjustable Guide Threader Sets use Reed Block Dies for easy cutting and precise threading. Block dies may be used as pipe thread chasers.